Canon W7250 - Manual (Page 74)

Printing from a Macintosh
2
4-2
Important
Note
Note
Printing
To print a job from a Macintosh software application, first select the printer
then use the Print command in the File menu.
z Before executing a print job with this printer, close all other software applications.
If another application is processing data during printing, this could cause loss of
data during data transfer, or cause the printer to temporarily pause during printing,
resulting in poor print quality.
z For more details about the printer driver, refer to the printer driver Help.
( Æ P.4-13)
Selecting the Printer
TMac OS 8.6/9.x
With Mac OS 8.6/9x use the Chooser to select the printer. However, if the
printer is switched off, or if the cable is disconnected, the name of the printer
will not appear in the list. Be sure to check the status of the printer before
starting a print job.
z Occasionally you may not be able to share use of the printer when it is connected
via USB. If this case, connect to the USB or IEEE 1394 board directly. If the
printer is not shared, print from a Windows computer.
1
From the Apple menu, select Chooser.