Canon W7250 - Manual (Page 166)

Troubleshooting
42
7-42
Important
Note
5
While pinching the cutter blade at the grips (a), pull the cutter blade
off the carriage.
z To avoid personal injury from a cut, never touch the blade (a) after removing the
cutter.
6
Turn the cutter position adjustment dial one notch in the direction of
the arrow in the illustration.
If the dial is already at position 3, the cutter blade must be replaced with a
new one.
z The cutter position adjustment dial can be turned through positions 1 to 3, 1 notch
at a time, but cannot be turned in the opposite direction.
a