KERN & SOHN CFS 50K-3 - Manual (Page 67)

15.1 Models CFS 300-3, CFS 3K-5
Operation Display
 Switch-on balance and during the selftest press
.
„Pin“
 Use the numeric keys to enter password „9999“:
Confirm input by .
„Pin“ „----„
 Select bulk material or reference balance via
.
The appeared [
] displays the current balance.
When using as counting system, the bulk material
balance as well as the reference balance must be
linearized. Both scales must be linearized.
„tECH“ „LoCAL“

„tECH“ „rEmotE“
 If necessary, at balance zero display using
select the weighing unit [kg or lb], which shall be used for
linearization. The appeared [
] displays the current
weighing unit.
Acknowledge with .
„tECH“ „Unit“
 Ensure that there are no objects on the weighing pan.
Wait for stability display (indicator [
] atop
expires), then press .
 Carefully place first adjustment weight into the center of
the weighing plate on display „LoAd 1“.
Wait for stability display, then press .
 Carefully place second adjustment weight into the center
of the weighing plate on display „LoAd 2“.
Wait for stability display, then press .
 When „LoAd 3“ is displayed, place the third adjustment
weight carefully in the centre of the weighing plate.
Wait for stability display, then press .
CFS/CCS-BA-e-1422 67