KERN & SOHN CFS 50K-3 - Manual (Page 39)

9.2 Tolerance check for target quantity
 Press , the active tolerance weighing mode is indicated.
 If needed, select tolerance control for target weight (PSt nEt) with or
(models CFS 50K-3).
Display example model CFS 6K0.1:
 Press the TARE key , which shows the currently set upper threshold.
 To change, input the desired value, e.g. 100 pieces, with the numeric keys.
 Confirm with TARE key; the currently adjusted minimum threshold will be
displayed.
 To change, input the desired value, e.g. 90 pieces, with the numeric keys.
 Confirm with TARE key, the tolerance control will start.
The indicator
 above appears.
CFS/CCS-BA-e-1422 39