KERN & SOHN CFS 50K-3 - Manual (Page 60)

5. Automatic zero tracking
on display change
„AZt“
 Press , the current setting will be displayed.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select the next menu point „0 AUto“ with .

„AZn“ „2d“

„AZt“
6. Manual zero tracking
Range of loads in which the display will be set to zero after
actuation of the zero key. „0 mAnL“
 Press
, the current setting will be displayed.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select next menu point „Pin“ with
.

„0 mAnL“ „2“

„Pin“
7. Password for menu access „tECH“ „Pin“
 Press and input new password with numeric keys.
Confirm with and repeat password input.
 Confirm with
, the scale will return to its menu. On
successful input, „donE“ will be displayed; „FAIL“ will be
displayed on faulty input.
Repeat input in this case.
 Select the next menu point „GrA“ with .

„Pin1“ „----„

„Pin2“ „----„
„donE“
Adjustment or linearization must be done after configuration.
Implementation of adjustment cf. chapter 14. / Linearization cf. chapter 15.
60 CFS/CCS-BA-e-1422