KERN & SOHN CFS 50K-3 - Manual (Page 40)

 Determine the average piece weight (see chap. 10.1 or 10.2), place the
weighing goods and check using the tolerance mark
, if the number of the
placed pieces is under, within or above the specified tolerance.
Display of tolerance mark
, if weighing goods are under the specified tolerance:
Display of tolerance mark
, if weighing goods within the specified tolerance:
Display of tolerance mark
, if weighing goods above the specified tolerance:
 For tolerance control, also only one limit value can be set.
 If both limit values are deleted, the tolerance control is deactivated.
 Delete limit values:
When inputting the upper and lower threshold press and confirm with
the TARE-key.
40 CFS/CCS-BA-e-1422