KERN & SOHN ABT 220-5DM - Manual (Page 35)

ABT-BA-e-1312 35
11.3 Changing the display
You can change the display to activated units, piece counting, percentage and densi-
ty determination mode by pressing the [UNIT] key several times.
The default setting provides the following options:
[g]
→ [%] → [Pcs] → [ct] → [g] → …
Different settings have to be activated in the menu:
Repeatedly press the [CAL] key until "FUnC.SEL" appears.
Press [TARE] key
(Example)
Repeatedly press the [CAL] key until "Unit.SEL" appears.
Press [TARE] key


To select settings, use the [CAL] key:
Current settings are indicated by the standstill display ( ).
Confirm your selection by pressing the [TARE] key.
The [TARE] key is also used to deactivate a unit or function if
the corresponding setting with standstill display is shown in the
display.
Repeatedly press the [ON/OFF] key. This takes you back to the
menu/weighing mode.