KERN & SOHN ABT 220-5DM - Manual (Page 33)

ABT-BA-e-1312 33
10.3 Setting the date printout
This setting determines whether or not the date and time on the balance’s built-in
clock is printed out along with the log.
Press the [CAL] key repeatedly until "SettinG" appears.
Press the
[TARE]
key. The display shows “CAL dEF”.
Repeatedly actuate the [CAL] key until "Prtdt:∗∗" appears (The ∗∗
symbolise the current setting).
To change settings, actuate the [TARE] key when "Prtdt:∗∗" ap-
pears.

You can use the [CAL] key to select between the following set-
tings:
“Prtdt-on”
Date and time are printed.
“Prtdt-oF”
Date and time are not printed.
The current setting is indicated by the standstill display ( ).
Confirm your selection by pressing the
[TARE]
key
Actuate the [ON/OFF] key repeatedly. Return to menu/weighing
mode.
10.3.1 Printout Date and Time, without weight value
To print out only date and time, without weight value,
press [PRINT] button for approx. 3 sec.