Canon CXDI-55G - Manual (Page 32)

– 18 –
Appendix: Attaching the Optional Grid Unit
Attach the optional grid unit to the sensor unit by the procedure indicated below.
NOTE: Structure of grid unit is delicate. Do not drop, knock over, bend, or apply force or
jolt to it. Otherwise, the unit may be damaged.
When the grid unit is not in use, remove it from the sensor unit and store it in a
safe place where it will not fall.
Even if it is not extremely damaged, its characteristics may be changed, which
may cause a problem in image quality.
(1) Blow off the dust on the front and back of the grid unit.
(2) Place the sensor unit horizontally on a table.
(3) Hold the grid unit with both hands and
engage the hooks on the bottom of the
grid unit to the holes on the bottom of
the sensor unit.
(4) Gently set the grid unit over the sensor
unit. A click sound is heard when the
grid unit is locked properly.
NOTE: Ensure that the grid unit is locked
before lifting the sensor unit. Oth-
erwise, the grid unit will fall and
be damaged.
To remove the grid unit
Lift up the grid unit top by about
50 mm while pressing the lock of the
grid unit top in the direction of the
arrow. Now remove the grid unit by
sliding it downward.
Hook
Lock