Canon CXDI-55G - Manual (Page 24)

5. Inspection and Maintenance
– 10 –
5.1.2 Monthly Inspection
Perform the following inspection periodically more than once a month. Contact Canon
representative or distributor if there is any problem or if you cannot do it.
5.1.3 Yearly Inspection
Perform the following inspection periodically more than once a year. Contact Canon repre-
sentative or distributor if there is any problem or if you cannot do it.
5.1.4 Calibration
Perform calibration when exposure conditions have changed significantly.
See the
CXDI Series Operation Manual for the procedure for calibration.
Inspection
Result
Remedy
Date
/
Date
/
Date
/
Gen
e
ra
l
Check the performance of
the instrument by perform-
ing exposures using a phan-
tom or a resolution chart, or
perform self-test.
Good/Bad Good/Bad Good/Bad
Refer to the CXDI Series
Operation Manual for the
procedure for self-test. Con-
tact Canon or distributor if
there is any problem.
Inspection
Result
Remedy
Date
/
Date
/
Date
/
General
Check the performance of
the instrument by perform-
ing exposures using a phan-
tom or a resolution chart.
Good/Bad Good/Bad Good/Bad
Contact Canon or distributor
if there is any problem.