Canon CXDI-55G - Manual (Page 16)

– 2 –
2. Notes for Using the Instrument
(1) Handling
Handle the instrument carefully, as
it may be damaged if something is
hit against it, dropped, or receives a
strong jolt.
Also, handle the optional grid unit
with care too.
Do not pull the cable. Also, do not
pull the sensor unit when the cable
is tangled with something. Other-
wise, the cable may be damaged,
which may result in fire or electric
shock.
When transporting the instrument,
do not allow the sensor cable relay
connector to drag on the floor or
ground or bump against anybody or
any articles of property. It is recom-
mended to hold the cable while
transporting the instrument.
Otherwise, the connector get caught
by, bump against somebody result-
ing in injury or cause damage to the
property items and/or connector
itself as a result.
(2) Before Exposure
Sudden heating of the room in cold areas will cause condensation to form on the
instrument. In this case, wait until condensation disappears before performing expo-
sure.
If the instrument is used with condensation formed on it, problems may occur in the
quality of the instrument.
When an air-conditioner is going to be used, be sure to raise/lower the temperature
gradually so that a difference in temperature in the room and in the instrument does
not occur, to prevent forming of condensation.