Casio PX410R - Manual (Page 93)

E-91
Troubleshooting
Problem Possible Cause Action See page
Cannot save data to an SD
memory card.
Cannot recall data from an SD
memory card.
After transferring song data
from my computer, playback
stops part way through.
1. The memory card is write-
protected.
2. The memory card is not inserted
correctly into the card slot.
3. There is not enough space left on
the memory card .
4. You are trying to use a memory
card whose capacity is not
supported by this digital piano.
5. The memory card is damaged.
1. The memory card is not inserted
correctly into the card slot.
2. There is not enough space
available in the area into which
you are trying to import the data.
3. You are trying to use a memory
card whose capacity is not
supported by this digital piano.
4. The memory card is damaged.
Digital noise from the USB cable or
power cord caused data
communication between your
computer and digital piano to be
interrupted.
1. Adjust the memory card’s write
protect switch to enable data
storage.
2. Correctly insert the memory card
into the card slot.
3. Use a different memory card or
delete files you no longer need
from the memory card you are
using.
4. Use only a memory card of the
capacity specified for this digital
piano.
5. Use a different memory card .
1. Correctly insert the memory card
into the card slot.
2. Delete rhythm, SMF, or tone with
wave data currently in the digital
piano’s Flash memory to make
room for the imported data.
3. Use only a memory card of the
capacity specified for this digital
piano.
4. Use a different memory card.
Stop playback, disconnect the USB
cable from and then reconnect it to
the digital piano’s USB port, and
then try playing back the tune again.
If this does not correct the problem,
exit the MIDI software you are
using, and then disconnect the USB
cable from and then reconnect it to
the digital piano’s USB port. Next,
restart your MIDI software and try
playback again.
E-81
E-81
E-86
E-81
E-81
E-71
E-81
E-78
This is an unavoidable result of the digital sampling process,* and does not indicate
malfunction.
*
Multiple digital samples are taken for the low range, middle range, and high range of
the original musical instrument. Because of this, there may be a very slight difference in
tonal quality and volume between sample ranges.
A tone’s quality and volume
sounds slightly different
depending where it is played
on the digital piano.