Casio PX410R - Manual (Page 84)

E-82
Saving Data
To remove a memory card from the card slot
1
Press the memory card into the card slot and then
release it.
• This will cause the card to come part way out of the
digital piano.
2
Pull the memory card out of the card slot.
• After making sure that the data access lamp is not lit,
carefully pull the memory card from the card slot.*
*
Never remove the memory card from the card slot
or turn off the digital piano while any of the
following conditions exists.
• While the digital piano is in the SMF Player Mode
and the CARD indicator is on the display
• While the data access lamp is lit and the message
“Pls Wait” is on the display, indicating that a card
access operation is being performed
Basic Memory Card Operation
1
Insert the memory card into the card slot.
2
Press the CARD button.
• This causes the CARD indicator to appear on the
display, and also displays “Card” in the display’s text
area.
3
Press the [ ̄] CURSOR button to display the Card
Mode menu.
CURSOR
CARD
SD memory card slot
[+]/[–]
YES/NO
4
Use the [ ̇] and [̈] CURSOR buttons to display
the screen for the type of operation you want to
perform.
• See the pages referenced below for details about using
each of the above menu operations.
Loading a file (Crd Load): page E-84
Saving a file (Crd Save): page E-83
Renaming a file (Crd Rename): page E-85
Deleting a file (Crd Delete): page E-86
Formatting an SD memory card (Crd Format): page E-86
5
Press the [ ̄] CURSOR button to advance to the
next operation screen of each menu.
NOTE
• Layer, split, and Auto Harmonize are automatically turned
off while the memory card is being used. Tone and
rhythm selection, and rhythm playback are also all
disabled.
[
̇]
[
̈]
[
̇]
[
̈]
[ ̇] [ ̈]
[
̇]
[
̈]
o a d L
a v e S
e n e m a R
e l e t e D
o r t a m F