Canon IMAGE RUNNER 5065 - Manual (Page 56)

Protocol Settings 3-10
3
Usin
g a
TCP/IP Netw
or
k
[On] for : You can use WSD (Web Services for Devices) as the print
application.
is automatically set to 'On' if you set to 'On',
and enables device information to be obtained using WSD.
If you want to respond to multicast discovery requests, set Discovery> to 'On'.
IMPORTANT
IPv6 is not supported.
12
On the TCP/IP Settings screen, press [Use PASV Mode for
FTP]
➞ specify the following.
Set the PASV mode for FTP if you are using the optional Universal Send Kit.
IMPORTANT
Whether you use the PASV mode for FTP depends on the network environment
you are using and the settings of the file server you are sending to. Before
specifying the PASV mode for FTP, consult your network administrator.
13
On the TCP/IP Settings screen, press [IPP Print Settings]
➞
specify the following.
Specify the IPP print settings if you are using the optional UFR II/PCL/PS Printer
Kit or the optional Super G3 FAX Board.