Juniper Systems Classic GG User Manual
Classic graingage quick reference sheet

FRS Main Menu
1. Collect
2. Maps
3. Setup
4. Diagnostics
Collect
1. Spatial
2. Form
3. List
4. Navigation
5. Map Traits
6. Map Identifiers
Maps
1. Add
2. Edit
3. Delete
4. View
Setup
1. System
2. Traits
Management
3. Database Tools
4. Hardware Setup
Diagnostics
1. Load Cells
2. Moisture
3. Level Detect
Sensor
4. Actuators
5. Version
Information
6. Print Calibrations
System
1. Manage Devices
2. Define Standard Units
3. Define Backup Location
4. Label Printer
5. Preferences
6. About
Traits Management
1. Master Traits List
2. Trait Template
Database Tools
1. Export data to CSV
2. Import data from CSV
Hardware Setup
1. Weight Calibration
a. Edit Weight Calibration
b. Slope and Motion
2. Moisture Sensor
a. Moisture Curve
3. Chamber Volume
4. Level Sensor
5. Timers
6. Actuators
7. Setup File
8. GPS Setup
Harvest Setup
1. Select desired Activity – Harvest Plot or
Harvest Strip.
2. Select desired Field Map.
3. Select desired harvest Trait Template.
4. Select Collect.
5. Select desired Moisture Curve.
6. Select Form or Nav.
7. Select Navigation Type – Serpentine, Sequential, Circular, or Random.
8. Select the Left Range and Left Row (starting plot).
401
402
403
404
401
402
403
404
401
402
403
404
301
302
303
304
301
302
303
304
301
302
303
304
201
202
203
204
201
202
203
204
201
202
203
204
101
102
103
104
101
102
103
104
101
102
103
104
Serpentine
Sequential
Circular
Classic GrainGage Calibrating Guide
Load Cells—Calibration
1. Select Setup>System>Define Standards Units. Select English or Metric and number of decimal places.
2. Select Setup>Hardware Setup>Classic GrainGage Setup>Edit Weight Calibration
Slope and Motion Sensor needs to be turned OFF during calibration.
3. Record Weight Calibration Coefficient value.
4. In diagnostics from the main screen, select Load Cell and Tare weight.
5. Place known weight on weigh pan and verify weight reading being displayed.
6. Adjust the weight calibration using the following equation:
New Weight Cal Coefficient =Actual Weight / Measured Weight * Current Coefficient
7. Replace the current Weight Calibration Coefficient with the calculated value. Press Save (F4).
Classic GrainGage
Quick Reference
Sheet
9. Select the primary and secondary Direction of Travel.
10. Select Save.
11. Select Form.
12. Start harvesting.