beautypg.com

Juniper Systems Mesa Mobile Dock User Manual

Page 5

background image

Mesa Mobile Dock User’s Manual

right. Place screws into the holes and screw them in

half-way.

2. Slide the desktop base up so the screw slots on the

back slide onto the screws and tighten them.

3. On the front of the desktop base near the top and the

front of the dock near the bottom are two small screw

holes, one on the left and one on the right. Align the

holes, place screws into the holes, screw them in all

the way, and tighten them. The desktop base is now

ready to use.