Mounting options – Juniper Systems Mesa Mobile Dock User Manual
Page 4
4
Mesa Mobile Dock User’s Manual
Mesa is still accessible when it is in the mobile dock,
providing three ports total.
Note: The dock serial ports do not have 5V power available
on their DTR or RI pins for powering devices.
4. USB host ports: The mobile dock provides two
additional USB host ports. The USB host port on the
Mesa is still accessible when it is in the mobile dock,
providing three ports total.
Note: If 500mA is drawn from each port (1.5A total),
the batteries may take longer to charge than normal.
5. The audio jack of the Mesa is accessible when the
Mesa is in the mobile dock.
Mounting Options
Accessories are available for using the mobile dock as a
desktop base, mounting it onto a vehicle, and mounting it
onto a pole. You can also attach it directly to a wall.
Mesa Dock Desktop Base
The desktop base (optional mobile dock accessory) allows
the mobile dock to be used on a desktop or other flat,
stationary surface. A desktop metal base and four screws
are included.
Installing the Desktop Base:
1. On the back of the dock near the bottom are two
small screw holes, one on the left and one on the