beautypg.com

Juniper Systems Mesa Ethernet Dock User Manual

Page 5

background image

Mesa Ethernet Dock User’s Manual

5

Wall Mount

You can mount one or more ethernet docks to a wall. Here

is a recommended way to do this:
1. Cut a plywood panel to the size you need to fit the

number of ethernet docks you are going to use.

2. Select a location to mount the panel and docks where

a power supply and access to the computer you will

be using are available. For multiple docks, you can

use a power strip and ethernet hub to connect all the

docks to the computer.

3. You need 2 to 4 #8 wood screws per dock.
4. There are four screw holes for mounting purposes

as shown below. For each dock, put the wood

screws through these holes and screw them into the

plywood and then into the wall.

Desktop Base

The desktop base (optional accessory) allows the ethernet

dock to be used on a desktop or other flat, stationary

surface. A metal base and four screws are included.