Juniper Systems Mesa Ethernet Dock - Manual (Page 4)

4 Mesa Ethernet Dock User’s Manual
a. Wall charger provided with the Mesa
b. Vehicle charger cable (optional)
c. Larger capacity power supply for multiple docks
3. Use a CAT5 or CAT6 twisted pair ethernet cable
to connect the dock to an ethernet switch or to an
internal network. The cable length should not exceed
100 meters.
4. Place the Mesa into the dock (instructions are given
later in this manual). The Mesa automatically turns
on if it isn’t already on. Set the orientation for desired
viewing while in the dock.
5. Use communication software to communication
with the Mesa over an ethernet network. (This
can be custom software for your specific needs or
mobile management software available from third
party vendors such as MobiControl by SOTI, www.
SOTI.net. For more information, go to http://www.
junipersys.com/Juniper-Systems-Rugged-Handheld-
Computers/support/Knowledge-Base).
Mounting Options
Accessories are available for using the ethernet dock as a
desktop base, mounting it onto a vehicle, and mounting it
onto a pole. You can also attach it directly to a wall.