beautypg.com

Getting started, Step 1: install the battery pack, Chapter 2 – Juniper Systems Archer User Manual User Manual

Page 9

background image

This chapter repeats—with a few more details—the
installation instructions in the Quick Start Guide that
came with your Field PC.

Step 1: Install the battery

pack

1. Carefully unhook and lift up the

bottom hook of the hand strap, as
shown in the fi rst picture.

WARNING! Releasing the hand strap
hook too quickly may result in injury
or damage to the display. Use caution
when undoing the hook or when
holding the Field PC by its hand strap.

2. Press on the battery door and slide the

door latch to the right to unlock it, as
shown in the second picture.

3. Remove

the

battery door.

4. Insert the battery pack so battery

contacts match up.

5. Insert

the

tabs on the bottom of the

battery door into the case slots. Close
the battery door.

6. Press on the battery door. Slide the latch to the left

to lock it.

7. Reattach

the

hand strap.

Chapter 2

Getting Started

Chapter 2: Getting Started

9