Juniper Systems Allegro Desiccant Kit - Manual (Page 4)

If the indicator is pink, heat the bag according to the following
instructions:
Dry the bag in a cool, convection, circulating, forced air oven set at
245 degrees F. Be sure the bag has sufficient airflow around it.
Warning: Do not exceed 245 degrees. Failure to do so could melt the
desiccant.
Leave the bag in the oven for 24 hours. Once done, seal the bag in the
included air-tight bag or a small air-tight glass jar for cooling.
For detailed instructions, please see the white paper Mil-Spec
Desiccant Regeneration on our website.
If the color changes from pink back to blue, it is reusable. If the color
does not change, contact Juniper Systems for more information.
Color indicator
Storage
You must store the unused desiccant packs in the sealable plastic
bag in which the packs were shipped until you are ready to use
them. Storing the desiccant packs in containers that are not air tight
shortens the useful life of the desiccant pack.
Ordering Information
Replacement packs of two desiccant packs (part number 20391) can
be purchased from Juniper Systems, Inc. at [email protected] or by
calling (435) 753-1881.
1132 West 1700 North
Logan, UT 84341, USA
Tel
+1 435.753.1881
Fax +1 435.753.1896
Email [email protected]
Web www.junipersys.com
a Campbell Scientific Company
Mobile Field Computers and Mobile GIS/GPS
HarvestMaster
™ Brand Data Collection Tools for Agriculture
Part # 20393-02
Released May 2011