Philips VR454 - Manual (Page 5)

Description of Controls (cont’d) 5
Remote Control Transmitter
VCR Controls
33 VCR POWER Button
Press to turn VCR power ON or OFF. Also, used to set
the VCR for unattended tinier recording.
34 GO-TO Button
This button can make search easier by allowing you to
skip back or ahead on a tape. Press this button and select
desired counter number with NUMBER buttons,
followed by PLAY/STOP button.
35 VCR CH(annel) UP/DOWN, TRACKING Buttons
• Press “ A” or “ V” to scan up or down through the
VCR’s channels. Release at desired channel.
• In the Play and Slow modes, when playing a tape, press
TRACKING “ A ” or “ V ” button to adjust the tracking.
36 MENU Button
Press to call up the on-screen menu display.
37 NUMBER Buttons
( 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7,8 and 9 )
Use for channel selection, on-screen menu selection,
clock setting, program setting, etc. For selecting chaimels
1 to 9, first press “0” button and then press “1” to “9.”
(
100
)
Press this button first when selecting channels 100 and
higher.
38 SLOW/VAR(iable) SLOW Buttons
First press the SLOW button during SP or SLP playback
to view a slow-motion picture. The speed can be varied
from about 1/6 to about 1/30 of normal speed with the
VAR(iable) SLOW button.
39 STOP Button
Press to stop the tape.
40 REW(ind)/SEARCH Button
Press to rewind the tape at high speed. Also, during
playback, press this button to view the picture in rapid
reverse visual search.
41 PLAY Button
• Press to play back a tape.
• Press to release the Slow or Search mode and return to
playback.
42 FF (Fast Forward)/SEARCH Button
To move the tape forward at high speed. Also, during
playback, press this button for rapid forward visual
search.
43 F(rame) ADV(ance) Button
Press this button while in the Still mode to advance the
picture one frame at a time (Frame Advance).
44 PAUSE/STILL Button
• Press once to temporarily stop the tape during
recording (Pause).
• Press once to freeze the tape picture during playback
(StiU).
• Press again when you want to resume normal
playback or recording.
45 SLOW Button
Press during SP or SLP playback to view a slow-motion
picture.
46 REC(ord) Button
Press to start recording.
47 ONE TOUCH RECORDING (OTR) Button
Select the channel and press this button to start an
immediate recording 30 minutes to 9 hours long. Each
press delays the shut-off time by 30 minutes. Power shut
off is automatic.
48 MEMO(ry) Button
Press to memorize the tape position at which the counter
was reset to “0:00:00.”
49 X2 PLAY Button
Press during playback mode to view a tape at 2 times
normal playback speed.
50 Tape SPEED Button
Press to select recording speed (SP, SLP). In playback,
the tape speed is automatically selected (SP, LP, SLP).
51 CLEAR Button
• To erase incorrect or unwanted data in on-screen
menu operation.
• To reset the tape counter. “0:00:00” will appear on the
TV screen.
52 STATUS Button
Press this button to display the time counter, time,
function, and channel number.
53 TV/VCR Button
Press to select the signal source that your TV receives.
TV position
(VCR indicator on the display panel: OFF)
To watch TV or to watch one program while recording
another.
VCR position
(VCR indicator on the display panel: ON)
To watch a tape, monitor a recording, or watch a TV
broadcast selected with the VCR’s channel selector.