Philips VR454 - Manual (Page 4)

4 Description of Controls (conf d)
Rear Panel Remote Control Transmitter
TV Controls
21 AC (Alternating Current) Power Cord
Connect the AC Power Cord to a household outlet.
22 AUDIO IN(put) jack
For audio input connection from the output jack of a
portable video camera, another VCR, or another audio
source.
The Front Audio IN(put) jack has priority over the Rear
Audio IN(put) jack.
23 AUDIO OUT(put) Jack
For coimection to the audio input coimector on a TV,
another VCR, or an audio tape recorder.
24 VIDEO OUT(put) Jack
For video output coimection to a TV or another VCR.
25 VIDEO IN(put) jack
For video input coimection from the output jack of a
portable video camera, another VCR, or another video
source.
The Front Video IN(put) jack has priority over the Rear
Video IN(put) jack.
26 CH3/CH4 Switch
Set to channel 3 or 4 (whichever is not used for regular
TV broadcasting in your area) to use your TV as a screen
for your VCR. See “Hook Up Your VCR.”
27 RF OUT(put) Jack (out to TV set)
Use the supplied cable to connect this terminal to the
UHFA^HF input terminal on your TV set
28 ANT(enna) IN(put) Jack (in from Antenna)
Coimect your anteima or cable to this terminal.
29 TV POWER Button *
Press to turn TV power ON or OFF.
30 MUTE Button *
Press to instantly reduce the TV’s sound level. Press
again to return to previous setting.
31 VOLUME UP/DOWN Buttons *
Press “ A ” or “ V” to increase or decrease the TV’s
sound volume.
32 TV CHANNEL UP/DOWN Buttons *
Press “ A ” or “ V” to scan up or down through the TV
charmels. Release at desired chaimel.
* NOTE: Only applicable for Philips TV.