beautypg.com

14 one touch recording (otr), 1 make sure, Choose a tv program – Philips VR454 User Manual

Page 14: Start an otr, Select a recording length, To change the recording length, To cancel an otr, Vcr ch(annel) up/down buttons, Number buttons, Stop button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

14 One Touch Recording (OTR)

T

o set the VCR (Video Cassette Recorder) to automatically shut off after recording is completed, follow steps 1-3
below. OTR lets you quickly specify how long you want recording to continue. You don’t have to program the

timer with this function. You must use your remote control.

1

Make sure... |------------------------------------------------------

• the steps in “Hook Up Your VCR” are done, chaimels are

programmed into the VCR’s memory, and the TV and VCR are
both turned on.

• the clock is set to the correct time.
• the desired tape speed (SP, SLP) is selected. Use the tape SPEED

button.

• the record tab is in place on the cassette.
• the tape is long enough to record the programs.

Choose a TV Program

Press the VCR CH(annel) UP/DOWN or NUMBER buttons on the
remote control.

Start an OTR

Press the OTR button on the remote control.
The screen below appears.

Recording begins immediately.

OTR will flash on the VCR display.

This indicates that the VCR

will automatically shut off after"

30 minutes of recording.

OTR (030)

Select a Recording Length

Continue pressing the OTR button until the desired recording length
is displayed.

Each press of the button will add 30 minutes, up to 9 hours.

If pressed beyond 9 hours, “REC” appears on the TV screen.

• To check time remaining after an OTR has been set, press the

STATUS button.

[- To Change the Recording Length

Press the OTR button until the desired length is displayed.

To Cancel an OTR

To stop recording before the preset recording length is reached,

simply press the STOP button. If you want to cancel the OTR
mode but continue recording, press the OTR button several times
until the OTR indicator disappears. “REC” remains on the VCR
Display Panel.
• During recording, the displayed time counts down. When 0:00

is reached, recording stops and the power is switched off
automatically.

• If OTR is engaged in the Record-Pause mode, the timer will

count down normally, but recording will not begin until the
PAUSE/STILL button is pressed.

CHANNEL STOP Button

UP/DOWN

Buttons

rVPCAW

\t«PCAC»

CD

CD

CDACD CD C^A-

CD

t

CD CD

(»CRCH3 . ■

C25y

2

A I ie>a)

:Z) CD CD CD

:o CD CD

»

9

) CD (—)

a

-e-

ni----

FAT/

Usm stew

CD

OTR U3IO S2FUY

CD CD CD EEI-

SPEED

aUA

STATUS TV •.'ca

CD CD Cp CD

PHILIPS

REMOTE CONTROL

VCR CH(annel)

UP/DOWN Buttons

NUMBER Buttons

STOP Button

PAUSE/STILL Button

• OTR Button

STATUS Button

Remote Control