Start a recording, Set the vcr/tv button, Select the channel at the tv for viewing – Philips VR454 User Manual

Page 12: Jo return to the channei being recorded, Noje, 12 record one channel/see another

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

o record one channel while viewing another, follow steps 1-4 below. Please read all the instructions. You
must use your remote control.

12 Record One Channel/See Another

Start a Recording

I Start a recording as described on page 11.

Set the VCR/TV Button

I Press the TV/VCR button to select the TV mode. The VCR
' indicator disappears.

Select the Channel at the TV for Viewing

I Select the channel to be viewed at the TV, using the channel

controls on the TV or TV remote control.

The channel selected with the TV channel controls appears on the
TV screen. The channel selected with the VCR channel control is
recorded on the tape.

jo Return to the Channei Being Recorded

I First, using the channel controls on the TV or TV remote control,

return the TV to either chaimel 3 or 4 (Please see “Hook Up Your

VCR.”)

Now, press the TV/VCR button to view again the channel being

recorded.

* If you are not receiving channels, please repeat the

steps on page 7 - 8 of this book. Also, follow
carefully the instractions listed above.

Point the transmitter toward the remote sensor, within

the angle shown in the illustration above.

NOjE:

If you use a converter box or satellite

system hook-up, you may not be able to do
this feature.

Congratulations! You’ve taken many steps. Now, turn to

the next page and find out a little more about your VCR

and remote control.