Philips CDI200/37 - Manual (Page 16)

PLAYBACK
PLAYING AN AUDIO CD
2. Creating FTS titles
After creating a Favorite Track Selection for a disc, you can
compose a title of approx. 30 characters (depending on the
character width) for the selection using the keyboard screen.
The title then appears on the CD-Audio screen whenever the
disc is loaded.
At the CD-Audio screen, 'point-and-click' on the program star,
then 'point-and-click' on the save diamond.
to the keyboard screen.
Select each character of the
title in turn, using "shift" to
change between upper and
lower case characters and
"space" to separate words.
disc titf_
a b c d 1 g h 1 1 k 1 m
n O p q r s t u V w X y z
1 2 4 S 6 7 8 9 0
,
’
1 SPACE 1 j SHIFT 11 OeUETE | | Cl£AR |
1 CANCEL II OK 1
- Delete erases ±e last selected character.
- Clear erases the complete (or partially complete) title.
- Cancel returns to the CD-Audio screen without saving the title.
- OK saves the title and returns to the CD-Audio screen.
PLAYING AN AUDIO CD 3. CD graphics
Available on some player versions only.
- When an audio CD with
graphics is played, the CD
Graphics screen appears
automatically.
• To let the picture channel bar
appear/disappear click on the
action button anywhere
outside the channel bar.
• In general the channel
numbers 0 and 1 should always be on.
- Depending on the disc, other channel numbers might give you
other information such as the lyrics in a different language.
• Refer to the instructions that come with the disc for their functions.
To play audio only, click on
the 'audio' icon.
The CD-Audio screen then
appears with an additional icon
for CD Graphics.
Point and click on this icon to
obtain the CD Graphics screen
again.
AUDIO SCREEN
REVERSE
■fl ■ >
K^riPgTirrrTl
INFO SETnNGS DiM
m □ □
NOTE
Do not confuse channel numbers with the track numbers on the
CD-Audio screen
CAUXrON
NEVER LEAVE A STILL PICTURE ON THE SCREEN FOR ANY
LENGTH OF TIME. THIS CAN CAUSE BURNING-IN OF THE
PICTURE TUBE. IN SUCH A CASE SWITCH OFF THE PLAYER
OR REMOVE THE DISC.
PLAYING A PHOTO CD
After loading the disc, the CD-I start-up screen appears on the TV.
To start the Photo CD program, select the ‘PLAY CD-T icon on
the screen; you may also press the PLAY button (4) on the
player or remote control (6).
The opening screen of the Photo CD program now appears on
the TV.
At the bottom of this screen a menu bar with icons is shown.
Select the S' icon.
The 'Settings' screen will now appear.
To select a language click on the box, the flag or the name of
a country.
The previous setting is replaced automatically.
Select the icon (Return) of this screen to go back to the
Photo CD opening screen.
U —
I ^
• Select the fi icon (Information) and the INFORMATION
screen, explaining the control buttons of the menu bar in the
selected language, appears.
• From this point, all interaction is betu'een you and the
program.
CAUTION
NEVER LEAVE A STILL PICTURE ON THE SCREEN FOR ANY
LENGTH OF TIME. THIS CAN CAUSE BURNING-IN OF THE
PICTURE TUBE. IN SUCH A CASE SWITCH OFF THE PLAYER
OR REMOVE THE DISC.
-
16
-