Philips CDI200/37 - Manual (Page 13)

SETTING UP
SWITCHING ON AND OFF
• Press the ON/OFF button (7) to switch the player on.
• Switch on the TV (and HiFi system, if used).
• Select the CD-I input on the TV (and HiFi system if used).
- On the TV, the player
start-up screen will appear.
Note
Remember to set your TV
Channel to the same number as
the position of the channel
selector switch on the player
(15).
MA3NAVCK
JNFO SETTOiGS OIM MPun«v
UJ Q a a
— This screen has the following system function icons to guide
and assist you:
• Select:
l.Info: if you need help during start-up, or when playing CD-
Audio discs. (Available on some player versions only.)
2. Settings: to preselect your preferred start-up conditions.
3. Dim to reduce the screen brightness while the system is at rest.
4. Memory; to refer to the intermediate results of CD-I titles and
of FTS programs created for your CD-Audio discs.
5.0pen/close: to open or close the disc tray.
• Press the ON/OFF button (7) to switch the player off.
• Switch off the TV (and HiFi system, if used).
INFO SCREEN (available on some player versions only)
— The info screens offer help
info screen
related to the operating mode.
• Point-and-click on the function
for which you need help.
• When finished, point-and-click
on OK.
If your player offers the feature
to change languages, point-
and-click on the language
shown at the foot of the screen
to get the full list, then point-
and-click on your choice.
When finished, point-and-click
on OK.
•*S.*CE I
SETTINGS SCREEN
This screen allows you to
settings screen
change the player settings:
Time — Select 24 hour or 12
hour clock.
Date —Select dd/mm/yy' to
present the date in day-month-
year sequence. Select
mm/dd/yy to present the date
in month-day-year sequence.
Time/date set - If the time or date shown on the screen is
wrong, select the appropriate < or > arrows to set hours,
minutes, day, month and year in turn, as required.
Scan time” — Select the time you want the beginning of each
audio track to play for (5, 10 or 20 seconds) when the scan
function is activated.
Auto shuffle and Auto FTS* — For each of these functions,
select "on" if you want the function to be activated
automatically when a disc is loaded.
Repeat” — Select to repeat a complete audio disc or a single
track when the repeat function is activated.
Default Volume setting — Select + or - to increase resp.
decrease the default volume. (-3dB per step).
• When finished, point-and-click on OK.
Note: Functions marked ” are CD-Audio functions.
MEMORY SCREEN
• The memory screen shows
the information held in
memory: titles, dates and
percentage of memory used.
MEMORY SCREEN Use the scroll arrows to move up and down the list.
To delete an item, click on its tide and then click on "delete".
If you change your mind after deleting, click on "undo".
When finished, point-and-click on OK.
- 1 3 -