Etting, Eock – Philips TP2785CI User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
etting
i
he
TV’
s
C
eock
!□
T/b«r television comes with an
J. onscreen clock. During normal
operation the clock appears on the
screen when the STATUSIEXIT but
ton is pressed or when a channel
change occurs.
tBEQINl
the remote to display the onscreen
CLOCK menu.
Press the CURSOR UP ► OR
CURSOR DOWN ■ buttons until
the words SET CLOCK are high
lighted.
Enter the current time using
the NUMBERED buttons. If the
first number is a single digit first
enter a zero then the digij»(i.e.,
press “0”, then press “8”).
^ or CURSOR LEFT but
tons to set either AM or PM time.
Note: The CLOCK onscreen menu
can also be accessed through the
main menu by pressing the MENU
button; then scrolling up/down
with the CURSOR UP ^ or
CURSOR DOWN ■ buttons until
the word CLOCK is highlighted.
Press the CURSOR RIGHT ^
button to activate the CLOCK
menu and follow the steps above to
set the time.
S
m a r i
H
i
I
i
>
Remember: Be sure to
* press “0” first and then the
hour number for single digit
entries.
To clear the onscreen menu press
the STATUS/EXIT button, or wait
a few seconds after you have fin
ished your adjustment and the
menu will automatically disappear
from the screen.
SET CLOCK
AM
TIMER ACTIVE
ON
CHANNEL
12
10:00 AM
TIMER ACTIVE
CHANNEL
ON
12
Note: If a power failure occurs, the TV's
CLOCK will have to be reset.
If no time is set, the time will not appear
onscreen. "