Philips FW62C - Manual (Page 25)

RECORDING
Dubbins tapes
U m m tape deck 2 to tape deck ¡1
CD Syucbro Start Recofdins
1 Load the prerecorded tape into tape deck 2 and a
blank tape into tape deckl.
-* Make sure that both tapes have their full spool to
the left.
2 Press DUBBING to switch between normal and high
speed dubbing.
" (normal speed) or T R S T " (high speed)
will be displayed.
— HSD flag appears on the display for high speed
dubbing.
3 Press PAUSE on tape deck 1.
4 Press RECORD on tape deck 1.
5 Press PLAY on tape deck 2.
Recording will start automatically.
— The REC flag starts flashing.
6 Press STOP*OPEN on tape deck 1 and tape deck 2 to
stop dubbing.
N otes:
- A t the end of side A, flip the tapes to side B and
repeat the procedure.
- D ubbing of tapes is only possible from tape deck 2 to
tape deck 1.
- To ensure good dubbing, use tapes of the sam e length.
- D uring high speed dubbing in Tape m ode, the sound is
reduced to a low volum e.
During CD synchro start recording,
• It is not advisable to fast forward/rewind your tape in
tape deck 2.
• It is not possible to listen to another source.
1
Load a blank tape into tape deck 1 and a disc into the
disc tray.
2 Press CD.
• You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
3 Press RECORD on tape deck 1 to start recording.
4 Press STOP »OPEN on tape deck 1 to stop recording
and STOP ■ to stop CD playback.
Recording from other sources
(only on tape
deck I) ________________
Load a blank tape into tape deck 1.
Press CD, TUNER, TAPE orAUX
Start playback of the selected source.
Press RECORD on tape deck 1 to start recording.
The REC flag is flashing.
Press PAUSE to interrupt recording.
Press STOP»OPEN on tape deck 1 to stop recording.
N ote:
- D uring recording, it is not possible to listen to another
sound source.
25