Philips FW62C - Manual (Page 17)

CD
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN'CLOSE
— The CD compartment slides out.
3 Load a CD with the printed side up in the right tray.
• You can load another disc in the left tray.
• To load the third disc, press the DISC CHANGE
button.
— The CD changer carousel will rotate until the empty
tray is at the right hand side and is ready for
loading.
-* Playback will always start with the disc in the outer
right disc tray.
4 Press OPEN«CLOSE to close the CD compartment.
— The total number of tracks and playing time of the
last selected disc appear on the display.
Playing a CD
3 CP Direct Play
You can play a CD directly by pressing the 3 CD DIRECT
PLAY (1 - 3) buttons. The CD player will stop at the end
of playback of the selected disc.
- When the button is lighted, it indicates that there is a
disc loaded in the disc tray.
1 Press PLAY ► to start playback.
The disc tray, track number and elapsed playing
time of the current track appear on the display.
• To interrupt playback, press PAUSE II.
The playing time flashes.
• To resume playback, press PLAY ► again.
2 To stop playback, press STOP ■ .
N ote:
- A ll the available discs w ill play once, then stop. W hen
the C D has stopped playing, the system w ill sw itch to
the standby m ode after 15 m inutes if no button is
pressed.
Selecting a desired track
Disc Change
You can change the outer 2 discs while the third inner
disc is at the stop or playing mode.
1 Press DISC CHANGE
The CD compartment slides out.
2 Replace the discs in the left and right disc trays.
• If you press DISC CHANGE again during playback,
the CD will stop playing.
— The CD carousel tray will rotate until the inner tray
is at the right hand side and is ready for changing.
3 Press OPEN*CLOSE to close the CD compartment.
Selecting a desired track at the stop mode
1 Press PREV M or NEXT N until the desired track
appears on the display.
2 Press PLAY ► to start playback.
— The selected track number and elapsed playing
time appear on the display.
Selecting a desired track during playback
1 Press PREV N or NEXT ►! until the desired track
appears on the display.
The selected track number and elapsed playing
time appear on the display.
• If you press PREV N once it will skip to the
beginning of the current track and play the track again.
Searching for a particular passage
during playback_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Press and hold ◄◄ or ►► until the desired passage is
located.
-* The volume will be reduced.
• Play returns to normal when ◄◄ or ►► is released.
17