Easy set, Switching the system on, Switching the system to standby mode – Philips FW62C User Manual
Page 15: Selecting the source, Sound control, To switch off dbb, Operating the system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Easy Set
EASY SET allows you to store all available radio stations
in a particular band (FM or AM) automatically.
• Press and hold STANDBY'ON
(on the system only)
for 2 seconds; when the system is in standby or
demonstration mode.
TRSy GETT" will be displayed and followed by
" Tl irp "
I UIML-T
n
.
EASY SET will start with the last active band.
-* All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
Notes:
- When EASY SET is used, all previously stored stations
will be erased.
-
The last preset station will appear on the display
when EASY SET is completed.
Switching the system ON
• Press STANDBY*ON
(on the system only),
CD,
TUNER, TAPE orAUX
You can also switch on the system by pressing any one of
the 3 CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press STANDBY»ON again.
The system will switch to standby mode.
Selecting the Source
• Press the respective source selection button: CD,
TUNER, TAPE orAUX
The display indicates the selected source.
Note:
- For an external source, make sure that you have
connected the audio left and right OUT terminals of
the external equipment (TV, VCR, Laser Disc or DVD
player) to the AUX IN terminals.
Sound Control
Volume Adjustment
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the il"!! socket at the
front of the system. The speakers will be muted.
Digital Sound Control (DSC)
The DSC feature enables you to enjoy special sound
effects that have preset equalizer settings, providing the
best music reproduction.
• Press DIGITAL SOUND CONTROL (DSC) to select
OPTIMAL, JAZZ, ROCK or TECHNO.
— The Digital Sound Control display panel will light up
respectively.
- "nPTItlEIL, jnZZ, f?EICK or
be displayed.
Automatic DSC-DBB selection
The best setting for the DBB is automatically generated
for the respective DSC selection. You can manually select
the DBB setting that best suits your listening
environment
OPERATING THE SYSTEM
0$C Selection
ORt^mal
Techno
Rock
Jaxz
DBB On/Off
On
On
Off
Off
Dynamic Bass Boost (DBB)
The DBB mode enhances the bass response.
• Press
DBB to switch on bass boost.
The DBB button lights up.
-*
"JJBB uU"
will be displayed.
DBB
DBB
• imp*
DBB
DBB
OFF
ON
To switch off DBB
• Press
DBB again.
The DBB button light is switched off.
-*"1)115 Orr" will be displayed.
Note:
-
Some CDs or tapes might be recorded in high
modulation. It may cause a distortion at high volume.
If this occurs, switch off DBB level or reduce the
volume.
15