Manual programming, Tuning to preset radio stations, Tuner – Philips FW62C User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Manual programming
1 Press TUNER
2 Press TUNER (BAND) to select the desired waveband
:FM or AM.
3 Press PROGRAM for less than one second.
PROGRAM flag, the frequency and preset number
start flashing.
The next available preset number will be displayed
for selection.
4 Press TUNING or ►► to tune to the desired
frequency.
• If you wish to store the radio station to another preset
number, press
PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
N otes:
-
W hen 40 radio stations are stored and you attem pt to
store another radio station, the display w ill show
"
PRuBPntI
rU i i If you w ant to change an
existing preset num ber; repeat steps 4 and 5.
-
Y ou can cancel m anual program m ing by pressing
S TO P
■
on the system only.
-
D uring program m ing, if no button is pressed w ithin 20
seconds, the system w ill exit program m ode
autom atically.
Tuning to Preset Radio Stations_ _ _ _ _ _ _ _ _ _ _ _
• Press
PRESET T or A to select the desired preset
number.
-*■ The preset number, frequency and waveband
appear on the display
20