Philips FW62C - Manual (Page 18)

CD
Programming Tracks
Programming tracks of a loaded CD is possible in the stop
mode. The display will indicate the total tracks stored in
the program. Up to 40 tracks can be stored in the memory
in any order. When 40 tracks are stored and you attempt
to store another track, the display will show
ri II I ”
I U(_ L_ .
1 Load the desired discs in the disc trays.
2 Press PROGRAM to start programming.
The PROGRAM flag starts flashing.
3 Press the CD 1*CD 2*CD 3 button to select the disc.
4 Press PREV !◄ or NEXT ►! to select the desired
track.
5 Press PROGRAM to store the track.
• Repeat steps 5 to 5 to store other discs and tracks.
6 Press STOP ■ once to end programming mode.
— The total number of tracks programmed and total
playing time appear on the display.
N ote:
- If the total playing tim e is m ore than "3 3 : 5 3 " or if
one of the program m ed tracks has a num ber greater
than 30, then " appears in the display instead
of the total playing tim e.
- D uring program m ing, if no button is pressed w ithin 20
seconds, the system w ill exit program m ode
autom atically.
Playing the program
1 Press PLAY ► to start program playback.
"PLnu PPOGPnfl" appears on the display.
The track number and elapsed playing time of the
current track will appear on the display.
• If you press REPEAT during program playback, the
current track will be played repeatedly.
— The REPEAT and PROGRAM flags will be displayed.
2 Press STOP ■ to stop program playback.
N ote:
- If you press any of the 3 C D D IR E C T PLA Y buttons, the
system w ill play the selected disc or track and the
stored program w ill be ignored tem porarily. The
P R O G R AM flag w ill also tem porarily disappear from
the display and then reappear w hen the playback for
the selected disc ends.
Reviewing the program_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Reviewing of the program is only possible in the stop
mode.
• Press PREV !◄ or NEXT ►! repeatedly to review the
programmed tracks.
• Press STOP ■ to exit review mode.
Erasing the program
(in the stop m ode)
• Press CLEAR on the system.
-* "PRuBRRil ll CRRCI j " will be displayed.
N ote:
- The program w ill be erased w hen the system is
disconnected from the pow er supply. If the C D
carousel is opened, the tracks belonging to tbe outer
tw o trays w ill be erased and the display w ill show
T L E R R E J } " .
Shuffle
(only on rem ote control)
It will play all the available discs and their tracks in
random order. Shuffle may also be used when tracks are
programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE
-* "GMUrruC" will be displayed.
The SEIUFELE flag, the disc and the track selected
at random appear on the display.
• The discs and the tracks will now be played in random
order until you press STOP ■.
• If you press REPEAT during shuffle, the current track
will be played repeatedly.
The REPEAT and PROGRAM flags will be displayed.
2 Press SHUFFLE again to resume normal playback.
-* The SHUFFLE flag disappears from the display.
Ropoat (only on rem ote control)
It will play the current track repeatedly.
1 Press REPEAT during CD playback.
— "RCPCRT TPRuK" will be displayed.
The REPEAT flag appears on the display.
• The track will now be played repeatedly until you
press STOP ■.
2 Press REPEAT again to resume normal playback.
-* The REPEAT flag disappears from the display.
18