2 getting started, 1 battery installation, 2 code setup – Philips Perfect SRP1003/27 User Manual
Page 6: 1 code search by brand, Gettingstarted, 2getting started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/680173/6/background.png)
2
Getting started
2.1
Battery installation
• Insert 2 AAA type
Alkaline batteries,
noting the + and -
configuration in the
battery
compartment.
2.2
Code setup
The^^ button is used to setup the remote
control.
2.2.1 Code search by brand
Lets you search for a code for a specific
brand within the code library for a particular
manufacturer.
1
Refer to ‘Code Tables’ (at the end of this
chapter) to find the code(s) for your
device(s).
2
Turn on the device (TV, Cable box, Satellite
box, etc.) you wish to operate.
3
Press and hold the
(S™;) button until
the red light
indicator®
remains lit, then
release the^j^
button.
4
Press and quickly
release the desired
mode button
SAT
^^
^ ^
[
cbl
) or^jp)).
•
The red light
indicator®
flashes off once.
5
Press and release the digit button (0-9)
corresponding to the desired brand (refer
to ‘Code Tables’ at the end ofthis chapter).
•
The red light indicator® flashes off
EN
P1003_27_Manual_80_210.indd 6
25-11-09 13:2