En 11 – Philips Perfect SRP1003/27 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.4.1 SettingVolume/Mute control
for all devices to any single
device
You can set all devices to use theVolume/Mute
buttons of a single device without needing to
change to that device mode.
1
Press and hold the
(S™!) button until
the red light
indicator® turns
on, then release
the button.
2
Press and hold the
(S® button until
the red light
indicator® flashes,
off, then release
the button.
3
Press and release
the desired device
mode button
SAT
[
cbl
]
or
(^) forVolume/
Mute control, the
red light indicator® flashes then remains
lit.
4
Press and release the^!$ button.
•
The red light indicator® turns off.
•
The red light indicator® will blink
rapidly for three seconds if the device
you have selected has no Volume/Mute
control.
•
All other devices will now use the
Volume/Mute buttons ofthe selected
device.
5
Press and release the^^S) button.
•
The red light indicator® turns off.
•
The selected device will now use its
own Volume/Mute control.
EN 11
P1003_27_Manual_80_210.indd 11
25-11-09 13:2