Example, Notes, 2 controlling combo devices – Philips Perfect SRP1003/27 User Manual
Page 16: 2 controllingcombodevices
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press and release
the Power ^D)
button to turn
OFF
the device.
Example
After setting up the remote control to
operateyour RCATV,theTV does notturn
ON
when you press the Power
№!D) button. In this case the Power ^D)
button only turns
OFF
the TV.
•
To turn
ON
the TV: press the^^
button
for more than 1 second.
•
To turn
OFF
the TV: press the Power
^D) button.
Notes
This method can be applied similarly to
any device and is available for all device
modes.
Note that this feature is not supported
by all codes.
4.2
Controlling combo devices
Some combo devices (e.g.TV/DVR,TV/DVD,
DVD/DVR, etc.) have separate buttons on the
original remote control to select the part of
the combo device to be controlled.
For example,
if your combo device is aTV/DVD
then its original remote control might have
separate TV and DVD buttons for selection
ofthe combo part you wish to operate.The
equivalent button functions can be found on
your Philips remote control by using the device
mode
(
cbl
|
or^^) and^^ buttons.
Example forTVIDVD combo, programmed under
DVD mode.
1
Set up the remote control for a device (in
this example TV) as described in chapter
2.2.1
‘Code search by brand’.
16 EN
P1003_27_Manual_80_210.indd 16
25-11-09 13:2