Philips FW540C - Manual (Page 27)

I SLEEP TIMER MAINTENANCE
Sleep Timer (only on remote controll
• When you reach the desired length of
time, stop pressing the SLEEP TIMER
button.
After this amount of time passes, the
system will switch to the standby
mode.
To switch off the sleep timer
• Press SLEEP TIMER repeatedly until
'‘OFF" is displayed, or press the
STANDBY ON button
Maintenance
This feature allows you to select a length Cleaning the Cabinet
of time after which the system will switch • Use a soft cloth slightly moistened with
to the standby mode automatically. a mild detergent solution. Do not use a
• Press SLEEP TIMER on the remote
solution containing alcohol, spirits.
control repeatedly to select a period of
ammonia or abrasives.
time. Cleaning Discs
— The selections are as follows (time in • When a disc becomes
minutes): dirty, clean it with a
GO H5 — 30 — ib — OFT cleaning cloth. Wipe
/
GO ... the disc from the 1
"bL.t:.t:.r XX" or " U r h " will be center out.
/ \\
displayed. ".X'.X" is the time in • Do not use solvents
minutes. such as benzine, thinner, commercially
available cleaners, or antistatic spray
intended for analog records.
Cleaning the CD lens
• After prolonged use, dirt or dust may
accumulate at the CD lens. To ensure
good playback quality, clean the CD lens
with Philips Magnavox CD Lens Cleaner
or any commercially available cleaner.
Follow the instructions supplied with
the cleaner.
Cleaning the Heads and the Tape Paths
• To ensure good recording and playback
quality, clean the heads, the capstan(s),
and pressure roller(s) after every 50
hours of tape operation.
• Use a cotton swab slightly moistened
with cleaning fluid or alcohol.
• You can also clean the heads by playing
a cleaning tape once.
Demagnetizing the heads
• Use a demagnetizing tape available at
your dealer.
27