Philips FW540C - Manual (Page 26)

CLOCK TIMER
w ; \ ' i H i f i S Y S T E M
o
, *K*l JH2 (m
' M • A M T A P t 1 • 2 V i D P O
I i TAPP
/ / / '
’ H .
\ \ .
\ \
3E I I i h H M
SOUND NAVIGATION
; / / / D I G I T A L
/ y S O U N D C O N T . S O L
View Clock
You can view the deck (if it is set) while
the system is in standby mode or any
source mode. It will be displayed for about
seven seconds.
• Press CLOCK/TIMER briefly (on the
system only).
— "F'fl iu ■ 38" (the current time)
will be displayed.
-*"........ ....... " will be displayed if the
clock is not set.
Clock Setting
The clock is set in 12-hour mode, e.g. "Hr!
or Before
setting the clock, you must be in the View
Clock mode.
V
\\
1 Press CLOCK/TIMER to select clock
mode.
"Fin ¡3'00" or the current time
starts flashing.
2 Set the hour with or
3 Set the minute with !◄ or ►!.
4 Press CLOCK/TIMER again to store the
setting.
The clock starts.
• To exit without storing the setting, press
■ on the system.
Notes:
- During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
- When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a preset
time. It can serve as an alarm to wake
you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the tinier will start to
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than two seconds to select timer mode.
" F i n 13-UU" or the last set timer
starts flashing. The timer flag
flashes.
The last selected source is lit while
other available sources are flashing.
2 Press CD or TUNER to select the
desired source.
• Before selecting CD, make sure a CD is
loaded in the CD tray.
3 Press or ►► to set the hour for the
timer to start.
4 Press N or ►! to set the minute for
the timer to start.
5 Press CLOCK/TIMER to store the start
time.
The timer is now set.
— The TIMER flag remains on the display.
• At the preset time, the timer will be
activated.
-* The selected source will be played.
Notes:
- During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
- If the source selected is TUNER, the last
tuned frequency will be switched on.
- If the source selected is CD, playback
will begin with the first track of the last
selected disc. If the CD trays are empty,
the TUNER will be selected instead.
To switch off the TIMER
1 Press CLOCK/TIMER for more than two
seconds.
2 Press ■ on the system to cancel the
timer.
The timer is now switched off.
The display will show "OF F " and the
TIMER flag disappears.
To start the TIMER again (for the same
preset time and source)
1 Press CLOCK/TIMER for more than two
seconds.
2 Press CLOCK/TIMER again to store the
start time.
The timer is now switched on.
-*■ The TIMER flag appears on the display.
26