Philips FW540C - Manual (Page 21)

CD TUNER
Shuffle (only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE
''S! IUF1'1...E" will be displayed.
The SHUFFLE flag, the disc and the
track selected at random appear on
the display.
• The discs and the tracks will be played
in random order until you press
STOP'CLEAR ■
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
— "IRRCK" or "flLL" will be
displayed.
-* * The REPEAT and shuffle flags will be
displayed.
2 Press SHUFFLE again to resume normal
playback.
The shuffle flag disappears from the
display.
Note:
- REPEAT DISC mode will be cancelled
when shuffle is selected.
Ropoat (only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control
during CD playback to select the various
repeat modes.
— " " D I S C " , "HLL" or
" will be displayed.
— The REPEAT flag appears on the
display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press
STOP-CLEAR ■
2 Press REPEAT until the " O F F " mode is
displayed to resume normal playback.
The REPEAT flag disappears from the
display.
Notes:
- REPEAT DISC mode is not available
during program play or shuffling mode.
- You can also repeat shuffling a program.
T or
jRnl'1" will be
displayed.
The REPEAT, PROGRAM and SHUFFLE flags
appear on the display.
M i r J I H I F I S Y S T E M
. JAZZ Щ|( -
1
■¿i
CD
1
*
2 - 3
FM-AM TAPcl
- 2
VIDEO
i.
[ tuner j f TAPE I лих i Л__________
rHARCh • TUNING STOP-CLEAR
/im
SOUND NAVIGATION
ю;
\ \ ' \ X ' / / / D i G i r . A L
, Ч У / / $ a и N D C о N 1 R ( 3 L
. a : .
Note:
- For 'EASY SET' feature, please refer to
page 15.
Tuning to radio stations
1 Press TUNER (FM*AM) to select
TUNER mode.
"7'UtiER" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (FM»AM) again to select
the desired waveband : FM or AM.
3 Press TUNING or ►►for more than
one second, then release.
-* The display will show "SEfTRCH"
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
TUNING or ►► repeatedly until the
display shows the desired frequency
and/or when the best reception has
been obtained.
21