Philips FW540C - Manual (Page 25)

RECORDING
Notes:
- For recording, use only tape of lEC type I
(normal tape).
- The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
- The recording level is set automatically,
regardless of the position of Volume,
DBBorDSC.
- To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect
CD Synchro Start Recording
During CD synchro start recording,
• Do not fast forward/rewind your tape in
tape deck 2.
• Do not listen to another source.
1 Load a blank tape into tape deck 1 and a
disc into the disc tray.
2 Press CD.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If you do not, the
tracks are recorded according to the
order on the selected disc.
3 Press RECORD on tape deck 1 to start
recording.
4 Press STOP»OPEN on tape deck 1 to
stop recording and STOP»CLEAR ■ to
stop CD playback.
Dubbing tapes (from tape deck2 to
tape deck 1)
1 Load the prerecorded tape into tape
deck 2 and a blank tape into tape deck
1
.
Make sure both tapes have their full
spool to the left.
2 Press PAUSE on tape deck 1.
3 Press RECORD on tape deck 1.
4 Press PLAY ► on tape deck 2.
Recording will start automatically.
The REc flag starts flashing.
5 Press STOP*OPEN on tape deck 1 and
tape deck 2 to stop dubbing.
Notes:
- At the end of side A, flip the tapes to
side B and repeat the procedure.
- Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
- To ensure good dubbing, use tapes of
the same length.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to start
recording.
— The REC flag starts flashing.
3 Press PAUSE to interrupt recording.
4 Press STOP*OPEN on tape deck 1 to
stop recording.
Recording from other sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER, TAPE or AUX
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to start
recording.
-* The REC flag starts flashing.
4 Press PAUSE to interrupt recording.
5 Press STOP*OPEN on tape deck 1 to
stop recording.
Note:
- During recording, it is not possible to
listen to another sound source.
25