Storing preset stations, Manual programming, Tuning to preset radio stations – Philips FW540C User Manual
Page 22: Tuner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1
Press
TUNER
(FM*AM).
2
Press
PROGRAM
for more than one
second.
The PROGRAM flag starts flashing and
" f n J T O "
will be displayed.
— The system will search for every
available station in the FM waveband
first, then search the AM waveband.
All available stations will be stored
automatically. Tbe frequency and
preset number will be displayed
briefly.
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
The system will remain tuned to the
last stored preset radio station.
Notes:
-
You can cancel the automatic
programming by pressing PROGHAM or
STOP*CLEAR
■
(on the system only).
- If you want to reserve a section of
preset numbers, for example preset
numbers I to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
22
programmed.
Manual programming
1
Press
TUNER
(FM*AM).
2
Press
TUNER
(FM*AM) again to select
the desired waveband : FM or AM.
3
Press
PROGRAM
for less than one
second.
— The PROGRAM flag starts flashing.
The next available preset number will
be displayed for selection.
4
Press
TUNING
«
or
►►
to tune to the
desired frequency.
• If you wish to store the radio station to
another preset number, press
PRESET
T
or
A
to select the desired preset
number.
5
Press
PROGRAM
again.
The PROGRAM flag disappears and the
radio station will be stored.
•
Repeat the
steps
5 - 5
to store other
preset radio stations.
Notes:
~ When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
'FULL
",
If you want to change an
existing preset number, repeat steps 3 -
5.
-
You can cancel manual programming by
pressing STOP»CLEAR
■
(on the
system only).
-
During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
PRESET
T
or
A
to select the
desired preset number.
— The preset number, radio frequency,
and waveband appear on the display.