Culligan Sulfur-Cleer - Manual (Page 20)

16
Preventative
Maintenance
The Culligan Sulfur-Cleer ™ water filter has been designed to provide a good, consistent service life.
Because of the nature of problem water, we recommend that the local Culligan dealer provide regular
maintenance/service contracts for the proper operation of your systems. The water filter service
begins with a multi point inspection of your water filter system in an effort to uncover any and all
problems that may exist. Listed below is a recommended list of maintenance items to be inspected at
a minimum of once a year (or more frequently depending on the raw water quality).
Test Water Feed Product
Hardness
Iron
Hydrogen Sulfide
Chlorine
TDS
Other
Comments:
Bypass Valve
Bypass in Service or Bypass?
Condition of bypass valve
Operation OK?
Control Valve
Condition of Eductor (Sulfur-Cleer™)
Condition of Solution Valve (Sulfur-Cleer™)
Condition of Seal Pack and Brine Piston
Condition of Solenoid Valve
Condition of Motor:
Condition of Flow Control
Condition of Switches:
Condition of Check Valve
Condition of Compressor
Output PSI
Control settings Before After
Check / reset time of day
Check time of regeneration
Compressor setting “On Time” in seconds
Compressor setting “Off Time” in minutes
Backwash minutes
Chemical Draw/Slow Rinse (Sulfur-Cleer™)
minutes
Fast Rinse minutes
Cycle control
Test Cycle OK?
Backwash
Chemical draw
Slow rinse
Fast rinse
Media Tank
Freeboard inches:
Media Condition