Culligan Sulfur-Cleer User Manual
Page 2
Thank You
And Welcome To Your New World Of Better Living With
Culligan Water.
This system and its installation must comply with state and local regulations. The System is ONLY to be
supplied with cold water.
The Culligan
®
Sulfur-Cleer
™
water filters have been tested against WQA S-200 for
the effective reduction of iron up to 1,000 gallons and WQA Test Protocol 04-001
and NSF/ANSI Standard 42 for the effective reduction of hydrogen sulfide as
verified and substantated by test data.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
For installations in Massachusetts, the Commonwealth of Massachusetts Plumbing
Code 248 CMR shall be adhered to. Consult your licensed plumber for installation
of the system. This system and its installation must comply with state and local
regulations. The use of saddle valves is not permitted.
If this is your first experience having filtered, conditioned water in your home, you’ll be amazed at the
marvelous difference it makes. We promise that you’ll never want to be without it again.
Congratulations, too, on selecting one of the “first family” of water filters in the prestigious Culligan
Sulfur-Cleer™. With Culligan’s many years of knowledge and experience in water treatment, you
can be confident that the model you selected has been designed and engineered to provide years of
service with a minimum of care and attention.
Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates
are protected by patents issued or pending in the United States and other countries. Culligan reserves
the right to change the specifications referred to in this literature at any time, without prior notice.
Culligan, Culligan Sulfur-Cleer, Cullar, Filtr-Cleer, Cullneu, Accusoft, Culligan Man and www.culligan.
com are trademarks of Culligan International Company or its affiliates.
ii