Culligan Sulfur-Cleer - Manual (Page 17)

When and
How to
Bypass
Your Water
Conditioner
13
Normally, all water except outside lines passes through the water conditioner. There are times when
the water conditioner should be bypassed, using the push-button Cul-Flo-Valv ® Bypass, or a 3-way
bypass valve. You should bypass:
1. If lines to outside faucets do not bypass the water conditioner, and you do not want to waste soft
water on lawn sprinkling or other outside uses.
2. If you are going away on vacation and want to save salt by not having the unit recharge while
you’re away.
Bypass Valve
In the back of Culligan water conditioners is a Cul-Flo-Valv ® Bypass. To bypass unit, simply turn the
blue knob clockwise. To return to soft water service, reverse the procedure - turn the blue knob counter-
clockwise.
Bypassed
To BYPASS, turn the blue knob clockwise (see directional arrow on end of knob)
until the knob stops as shown. DO NOT OVERTIGHTEN!
Soft Water
To return to SERVICE, turn the blue knob counter-clockwise (see directional arrow on end of knob) until
the knob stops as shown. DO NOT OVERTIGHTEN!
About 1-1/4”
A screwdriver shank may be
used in the slot (arrow) as a
lever for extra turning force if
needed.