Regeneration with bleach – Culligan Sulfur-Cleer User Manual
Page 18
Regeneration
with Bleach
When bleach is used to regenerate the Sulfur-Cleer
™
, Culligan strongly recommends the dealer set-up a
service contract with the customer to initiate the regeneration when required.
If a service contract is not practical, then Culligan recommends the dealer and the customer strictly
abide by the following procedure when regenerating with bleach:
• The dealer must instruct the customer on the handling of chlorine and review the DANGER
statements on the bleach bottle with the customer.
• The dealer must review the first aid instructions on the bleach bottle with the customer.
• The dealer must be present with the customer during the first regeneration.
• Protective eyewear and gloves are required.
See the Installation and Operation Manual or contact the Culligan Dealer for regeneration procedure
with bleach.
14
Caution! USE AND HANDLING OF HOUSEHOLD BLEACH
Bleach is a strong oxidizing agent. It can cause severe irritation or damage to eyes and
skin. Observe all precautions stated on the bleach container.
• Store the bleach in a cool dry place out of reach of children and pets.
• Do not store an unmarked container or a container with any markings which could
mislead someone as to its actual contents.
• Keep the bleach covered when not in use and tightly closed.