Interlogix GE-DS-242-PoE - Manual (Page 70)

Chapter 4: Web-Based Management
66 GE-DS-242-PoE Managed Ethernet Switch User Manual
OBJECT DESCRIPTION
VLAN Name
Use this optional field to specify a name for the VLAN. It can be up
to 16 alphanumeric characters long, including blanks.
VLAN ID
You can configure the ID number of the VLAN by this item. This field
is used to add VLANs one at a time.
The VLAN group ID and available range is 2-4094.
Port Indicate port 1 to port 26.
Untag Packets forwarded by the interface are untagged.
UnTag Member
Tag
Defines the interface as a tagged member of a VLAN.
All packets forwarded by the interface are tagged. The
packets contain VLAN information.
6. After setup completed, please press "Apply" button to take effect.
7. Please press "Back" for return to VLAN configuration screen to add other
VLAN group, the screen in Figure 4-28 appears.
8. If there are many groups that over the limit of one page, you can click Next to
view other VLAN groups.
9. Use the Delete button to delete unwanted VLAN.
10. Use the Edit button to modify existing VLAN group.
NOTE:
Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN,
VID is 1. The default VLAN can't be deleted.
VLAN Filter
 802.1Q VLAN Port Configuration
This page is used for configuring the Switch port VLAN. The VLAN per Port
Configuration page contains fields for managing ports that are part of a VLAN.
The port default VLAN ID (PVID) is configured on the VLAN Port Configuration
page. All untagged packets arriving to the device are tagged by the ports PVID.
This section provides 802.1Q Ingress Filter of each port from the Switch, the
screen in Figure 4-30 appears.