Interlogix GE-DS-242-PoE - Manual (Page 167)

Chapter 6: Command Line Interface
GE-DS-242-PoE Managed Ethernet Switch User Manual 163
Port Mirroring Configuration
Port monitoring is a feature to redirect the traffic occurred on every port to a
designated monitoring port on the switch. With this feature, the network
administrator can monitor and analyze the traffic on the entire LAN segment. In
the Managed Switch, you can specify one port to be the monitored ports and any
single port to be the monitoring port. You also can specify the direction of the
traffic that you want to monitor. After properly configured, packets with the
specified direction from the monitored ports are forwarded to the monitoring port.
NOTE:
The default Port Monitoring setting is disabled.
mirror-port
Description:
Set port monitoring information. (RX only|TX only|both RX and TX)
Syntax:
mirror-port <rx | tx | both> <port-id> <port-list>
Parameters:
rx
specifies monitoring rx only.
tx specifies monitoring tx only.
both specifies monitoring both rx and tx.
<port-id> specifies the analysis port ID. This port receives traffic from all
monitored ports.
<port-list> specifies the monitored port list.
show mirror-port
Description:
Show port monitoring information.