IC Realtime IP High Speed PTZ Dome Camera with 36X Zoom and WDR (ICIPZ3601WDR) - Manual (Page 9)

2
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses.
1.2.8 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.9 Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.10 Auto Flip
The dome rotates 180 degrees and repositions itself for uninterrupted viewing of any subjects that passes
directly beneath the dome.
1.2.11 Self-diagnosis
There is a self diagnosis procedure for the engine and the camera when dome boots up. It can display the
detect result and the initialization information.
1.2.12 Day/Night Mode (B/W & Color Mode)
System can automatically switch to black and white mode in low illumination.
1.2.13 Auto Focus
Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to get vivid
image.
1.2.14 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.15 3D Intelligent Location
Working with DVR, just click part of the current scene will be displayed in the central window and
automatically zooms. All of these allow you to trace precisely.
1.2.16 Idle Status
When there is no available order, you can use menu to set dome idle status after specified duration. The idle
status includes turn to specified preset or go to scan, tour or pattern function.
1.2.17 Power up
The speed dome executes the power up operation after it rebooted and completed the initialization. The
power up function includes auto, preset, scan, tour, pattern and none.
1.2.18 Image Flip
You can enable image flip in the menu.
The flip function allows you to view continuous video.