IC Realtime IP High Speed PTZ Dome Camera with 36X Zoom and WDR (ICIPZ3601WDR) - Manual (Page 22)

15
z DAY/NIGHT: Set day/night mode. It includes the third-level menu. Please move the cursor to highlight
current item and then click the OK button to go to the sub-menu. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z FOCUS MODE: There are several options. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z FOCUS LIMIT: It is to set the distance between the speed dome and the monitor object. It can avoid the
focus on the enclosure if the focus distance is too near and you can change the focus distance to set
the focus speed. There are several options. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z ZOOM SPEED: There are several options. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z DIGITAL ZOOM: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z APERTURE: It is a parameter to adjust the video whole definition and the sharpness of the edge. The
value ranges from 1 to 16. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z NEXT PAGE: It includes the following options: picture flip, freeze function, stabilization, camera factory
default setup, camera restart, exit and back function setup. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. Click the OK button; you can view the rest camera
settings.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
5.4.3.1 Exposure Setting
z AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris priority)/TV
(shutter priority). Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
o
Auto: It becomes valid after you set the exposure compensation, backlight compensation
(BLC), slow shutter, wide dynamic region (WDR).
o
Manual: It becomes valid after you set the gain setting, shutter, iris setting, wide dynamic
region (WDR).
o
AV: It becomes valid after you set the exposure setting, iris setting, wide dynamic region
(WDR).
o
TV: It becomes valid after you set the shutter setting, exposure compensation, wide dynamic
region (WDR).
z GAIN SETTING: It is to adjust the gain. There are several options. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
AE MODE : AUTO
GAIN SETTING : 02
SHUTTER : 1/50
IRIS SETTING : 11
EXPOSURE COM : 08
SLOW AE : 01
SLOW SHUTTER ON
WDR ENBALE : OFF
NEXT PAGE
BACK
EXIT
BLC :ON/OFF
GAIN LIMIT : 08
SLOW SHUTTER LIMIT : 1/12
NOISE REDUCTION : 03
3D NOISE CONTROL : ON/OFF
BACK
EXIT