IC Realtime IP High Speed PTZ Dome Camera with 36X Zoom and WDR (ICIPZ3601WDR) - Manual (Page 24)

17
PRESET
PAN
AUTO SCAN
AUTO CRUISE
AUTO PATTERN
IDLE FUNCTION
PRIVACY MASK
NEXT PAGE
BACK
EXIT
PICTURE FLIP :ON
FREEZE FUNCTION :ON
FOCUS SENSITIVITY : DEFAULT
STABALIZATION : ON
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK
EXIT
z SENSITIVITY: It is the threshold value when the system switches from the black and white to the color
in the auto mode.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
5.4.3.3 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.
z PICTURE FLIP: This function allows you to turn the image rotation 180 degrees. There are two options:
on/off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z FOCUS SENSITIVITY: It is to set focus sensitivity.
z STABALIZATION: It is to effectively remove the effect of the slight vibration on the video. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set. .
z CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
5.4.4 Function Setting
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
z
PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
z PAN: It is to set the speed dome rotation speed. Move the cursor to PAN and then click confirm button
to go to the third submenu.